Horizons 3e is listed in the DishTuner satellite database at 169.0°E. This page summarizes the available satellite channels, representative frequencies, coverage information, languages and tuning notes so viewers can understand what to expect before adjusting a dish or scanning a receiver.
Horizons 3e Satellite Overview
| Satellite Name | Horizons 3e |
|---|---|
| Orbital Position | 169.0°E |
| Coverage Regions | Pacific, Asia, Middle East |
| Total Channels in Database | 8 |
| Total Transponders in Database | 2 |
| Free-to-Air Channel Rows | 0 |
| Encrypted Channel Rows | 8 |
| Main Languages | 1126 Eng, 1226 Eng, 2020 Eng, 2024 Eng, 1725 Eng, 1520 Eng, 1420 Eng, 1620 Eng |
Coverage Area of Horizons 3e
DishTuner currently groups Horizons 3e with these coverage regions: Pacific, Asia, Middle East. Actual reception can vary by beam, dish size, weather, cable quality and local horizon clearance. Use this coverage information as a practical starting point, then confirm the available signal from your own location.
Regions Covered
The main region labels for Horizons 3e are Pacific, Asia, Middle East. These labels describe the database coverage grouping, while real reception still depends on the active beam and local installation conditions.
Countries Covered
The channel data associated with Horizons 3e includes country links such as Australia, French Polynesia, New Caledonia, Japan, Mongolia, Philippines, South Korea, France, Russia, United Kingdom, Tajikistan, Uzbekistan. Some services may still be beam-specific or encrypted, so the receiver scan in your area may show fewer or different services than a complete database list.
Channels Available on Horizons 3e
DishTuner currently lists 8 unique channels connected to Horizons 3e. Channel availability can include free-to-air services, encrypted packages and regional feeds. For a full scan, use the satellite and channel tools on DishTuner satellites and DishTuner channels.
Popular Channel Categories
The DishTuner database focuses on practical receiver data: channel names, frequencies, symbol rates, countries, languages and encryption status. Because category labels are not always available in imported satellite data, use language, country and free-to-air filters to narrow the list to the services most relevant to your setup.
Channel List on Horizons 3e
The table below shows a representative channel sample for Horizons 3e. The complete channel lineup may be longer and can change when providers update frequencies or encryption status.
| Channel | Frequency | Polarity | Symbol Rate | Language | Access |
|---|---|---|---|---|---|
| AFN Prime Pacific | 4172 | L | 11000 | 1126 Eng | PowerVu |
| AFN News | 4172 | L | 11000 | 1226 Eng | PowerVu |
| AFN Sports | 4172 | L | 11000 | 2020 Eng | PowerVu |
| AFN Sports 2 | 4172 | L | 11000 | 2024 Eng | PowerVu |
| AFN The Eagle Japan | 4172 | L | 11000 | 1725 Eng | PowerVu |
| AFN The Voice | 4172 | L | 11000 | 1520 Eng | PowerVu |
| AFN Music Service 1 | 4172 | L | 11000 | 1420 Eng | PowerVu |
| AFN Music Service 2 | 4172 | L | 11000 | 1620 Eng | PowerVu |
Transponder List of Horizons 3e
Receiver tuning depends on accurate transponder values. The following sample includes frequencies and symbol rates currently stored for Horizons 3e. Always rescan from the latest receiver list when services move or providers update multiplexes.
| Frequency | Polarization | Symbol Rate | Beam |
|---|---|---|---|
| 4172 | L | 11000 | Varies |
| 11322 | H | 7500 | Varies |
Languages Available on Horizons 3e
The language data currently associated with Horizons 3e includes 1126 Eng, 1226 Eng, 2020 Eng, 2024 Eng, 1725 Eng, 1520 Eng, 1420 Eng, 1620 Eng. Audio language metadata can vary by channel and transponder, especially where a service carries multiple audio tracks.
Main Languages
Main language labels for Horizons 3e currently include 1126 Eng, 1226 Eng, 2020 Eng, 2024 Eng, 1725 Eng, 1520 Eng, 1420 Eng, 1620 Eng. If a channel carries several audio tracks, your receiver may show more language options after scanning.
Free-to-Air Channels on Horizons 3e
DishTuner marks 0 channel-transponder rows for Horizons 3e as free-to-air or clear where the database provides that status. Free-to-air availability can change, so scan the latest frequencies and verify whether your receiver identifies each service as clear or encrypted.
Encrypted and Paid Channels
The database also contains 8 encrypted channel-transponder rows for Horizons 3e. Encrypted services usually require a valid subscription, compatible receiver or provider-approved module, depending on the platform.
How to Tune Horizons 3e
Start by selecting Horizons 3e in your receiver, then enter one known frequency, polarization and symbol rate from the transponder list. After locking signal, run a blind scan or network scan if your receiver supports it. For dish pointing, DishTuner can help calculate azimuth, elevation and LNB skew for your location using the dish alignment tool.
Why Use DishTuner for Horizons 3e?
DishTuner keeps satellite, transponder and channel information in one place so you can move from research to setup quickly. You can browse satellites, compare frequencies, check channel countries and use alignment angles before making physical dish adjustments.
Related Satellites
- NSS 9 177.0°W
- Intelsat 18 180.0°E
- Eutelsat 172B 172.0°E
- ChinaSat 3B 167.0°E
- Intelsat 19 166.0°E
- ChinaSat 19 163.0°E
Frequently Asked Questions
What is Horizons 3e used for?
Horizons 3e is used for satellite TV and radio distribution, data services or regional feeds where the current database lists active channels and transponders.
Which countries are covered by Horizons 3e?
Country links currently associated with Horizons 3e include Australia, French Polynesia, New Caledonia, Japan, Mongolia, Philippines, South Korea, France, Russia, United Kingdom, Tajikistan, Uzbekistan, but actual reception depends on beam coverage, dish size and local setup.
How can I find channels on Horizons 3e?
Use the channel list and transponder sample on this page, then scan the latest frequencies on your receiver. DishTuner currently lists 8 unique channels for Horizons 3e.
Does Horizons 3e have free-to-air channels?
Some rows for Horizons 3e are marked as free-to-air or clear in the database. Use the latest transponder values and confirm the result with your own receiver scan.
What information do I need to tune Horizons 3e?
You need the satellite position, dish pointing angles, frequency, polarization and symbol rate. DishTuner can help with the alignment values and receiver tuning data.
Conclusion
Horizons 3e at 169.0°E is part of the DishTuner satellite database with useful channel, frequency, coverage and tuning information. Use this page as a starting point, then confirm final reception with the latest scan from your receiver and local dish setup.