JCSAT 3A is listed in the DishTuner satellite database at 128.0°E. This page summarizes the available satellite channels, representative frequencies, coverage information, languages and tuning notes so viewers can understand what to expect before adjusting a dish or scanning a receiver.
JCSAT 3A Satellite Overview
| Satellite Name | JCSAT 3A |
|---|---|
| Orbital Position | 128.0°E |
| Coverage Regions | Pacific, Asia, Middle East, Europe |
| Total Channels in Database | 11 |
| Total Transponders in Database | 6 |
| Free-to-Air Channel Rows | 11 |
| Encrypted Channel Rows | 0 |
| Main Languages | Jpn, 4168 Jpn, 4165 Jpn, 4169 Jpn, 4167 Jpn |
Coverage Area of JCSAT 3A
DishTuner currently groups JCSAT 3A with these coverage regions: Pacific, Asia, Middle East, Europe. Actual reception can vary by beam, dish size, weather, cable quality and local horizon clearance. Use this coverage information as a practical starting point, then confirm the available signal from your own location.
Regions Covered
The main region labels for JCSAT 3A are Pacific, Asia, Middle East, Europe. These labels describe the database coverage grouping, while real reception still depends on the active beam and local installation conditions.
Countries Covered
The channel data associated with JCSAT 3A includes country links such as Japan, United States. Some services may still be beam-specific or encrypted, so the receiver scan in your area may show fewer or different services than a complete database list.
Channels Available on JCSAT 3A
DishTuner currently lists 11 unique channels connected to JCSAT 3A. Channel availability can include free-to-air services, encrypted packages and regional feeds. For a full scan, use the satellite and channel tools on DishTuner satellites and DishTuner channels.
Popular Channel Categories
The DishTuner database focuses on practical receiver data: channel names, frequencies, symbol rates, countries, languages and encryption status. Because category labels are not always available in imported satellite data, use language, country and free-to-air filters to narrow the list to the services most relevant to your setup.
Channel List on JCSAT 3A
The table below shows a representative channel sample for JCSAT 3A. The complete channel lineup may be longer and can change when providers update frequencies or encryption status.
| Channel | Frequency | Polarity | Symbol Rate | Language | Access |
|---|---|---|---|---|---|
| Better Life Channel | 12568 | V | 23303 | Jpn | FTA / Clear |
| Hamamatsu Autorace | 12568 | V | 23303 | 4168 Jpn | FTA / Clear |
| Sukachan 5 | 12568 | V | 23303 | 4165 Jpn | FTA / Clear |
| Sukachan 8 | 12568 | V | 23303 | 4169 Jpn | FTA / Clear |
| Hamamatsu Autorace浜松オートレース | 12568 | V | 23303 | Jpn | FTA / Clear |
| Sukachan 5スカチャン 5 | 12568 | V | 23303 | Jpn | FTA / Clear |
| Sukachan 8スカチャン 8 | 12568 | V | 23303 | Jpn | FTA / Clear |
| Sukachan 2 | 12598 | V | 23303 | 4167 Jpn | FTA / Clear |
| Sukachan 2スカチャン 2 | 12598 | V | 23303 | Jpn | FTA / Clear |
| Sukachan 7 | 12718 | V | 23303 | 4167 Jpn | FTA / Clear |
| Sukachan 7スカチャン 7 | 12718 | V | 23303 | Jpn | FTA / Clear |
Transponder List of JCSAT 3A
Receiver tuning depends on accurate transponder values. The following sample includes frequencies and symbol rates currently stored for JCSAT 3A. Always rescan from the latest receiver list when services move or providers update multiplexes.
| Frequency | Polarization | Symbol Rate | Beam |
|---|---|---|---|
| 12568 | V | 23303 | Varies |
| 12598 | V | 23303 | Varies |
| 12643 | H | Ku | |
| 12673 | H | Ku | |
| 12688 | V | Ku | |
| 12718 | V | 23303 | Varies |
Languages Available on JCSAT 3A
The language data currently associated with JCSAT 3A includes Jpn, 4168 Jpn, 4165 Jpn, 4169 Jpn, 4167 Jpn. Audio language metadata can vary by channel and transponder, especially where a service carries multiple audio tracks.
Main Languages
Main language labels for JCSAT 3A currently include Jpn, 4168 Jpn, 4165 Jpn, 4169 Jpn, 4167 Jpn. If a channel carries several audio tracks, your receiver may show more language options after scanning.
Free-to-Air Channels on JCSAT 3A
DishTuner marks 11 channel-transponder rows for JCSAT 3A as free-to-air or clear where the database provides that status. Free-to-air availability can change, so scan the latest frequencies and verify whether your receiver identifies each service as clear or encrypted.
Encrypted and Paid Channels
The database also contains 0 encrypted channel-transponder rows for JCSAT 3A. Encrypted services usually require a valid subscription, compatible receiver or provider-approved module, depending on the platform.
How to Tune JCSAT 3A
Start by selecting JCSAT 3A in your receiver, then enter one known frequency, polarization and symbol rate from the transponder list. After locking signal, run a blind scan or network scan if your receiver supports it. For dish pointing, DishTuner can help calculate azimuth, elevation and LNB skew for your location using the dish alignment tool.
Why Use DishTuner for JCSAT 3A?
DishTuner keeps satellite, transponder and channel information in one place so you can move from research to setup quickly. You can browse satellites, compare frequencies, check channel countries and use alignment angles before making physical dish adjustments.
Related Satellites
- NSS 9 177.0°W
- Intelsat 18 180.0°E
- Eutelsat 172B 172.0°E
- Horizons 3e 169.0°E
- ChinaSat 3B 167.0°E
- Intelsat 19 166.0°E
Frequently Asked Questions
What is JCSAT 3A used for?
JCSAT 3A is used for satellite TV and radio distribution, data services or regional feeds where the current database lists active channels and transponders.
Which countries are covered by JCSAT 3A?
Country links currently associated with JCSAT 3A include Japan, United States, but actual reception depends on beam coverage, dish size and local setup.
How can I find channels on JCSAT 3A?
Use the channel list and transponder sample on this page, then scan the latest frequencies on your receiver. DishTuner currently lists 11 unique channels for JCSAT 3A.
Does JCSAT 3A have free-to-air channels?
Some rows for JCSAT 3A are marked as free-to-air or clear in the database. Use the latest transponder values and confirm the result with your own receiver scan.
What information do I need to tune JCSAT 3A?
You need the satellite position, dish pointing angles, frequency, polarization and symbol rate. DishTuner can help with the alignment values and receiver tuning data.
Conclusion
JCSAT 3A at 128.0°E is part of the DishTuner satellite database with useful channel, frequency, coverage and tuning information. Use this page as a starting point, then confirm final reception with the latest scan from your receiver and local dish setup.
