Intelsat 35e

Intelsat 35e is listed in the DishTuner satellite database at 34.5°W. This page summarizes the available satellite channels, representative frequencies, coverage information, languages and tuning notes so viewers can understand what to expect before adjusting a dish or scanning a receiver.

Intelsat 35e Satellite Overview

Coverage Area of Intelsat 35e

DishTuner currently groups Intelsat 35e with these coverage regions: Africa, Asia, Europe, Middle East, North America, Pacific, South America. Actual reception can vary by beam, dish size, weather, cable quality and local horizon clearance. Use this coverage information as a practical starting point, then confirm the available signal from your own location.

Regions Covered

The main region labels for Intelsat 35e are Africa, Asia, Europe, Middle East, North America, Pacific, South America. These labels describe the database coverage grouping, while real reception still depends on the active beam and local installation conditions.

Countries Covered

The channel data associated with Intelsat 35e includes country links such as Australia, French Polynesia, New Caledonia, Japan, Mongolia, Philippines, South Korea, Tajikistan, Uzbekistan, United Arab Emirates, France, Russia. Some services may still be beam-specific or encrypted, so the receiver scan in your area may show fewer or different services than a complete database list.

Channels Available on Intelsat 35e

DishTuner currently lists 157 unique channels connected to Intelsat 35e. Channel availability can include free-to-air services, encrypted packages and regional feeds. For a full scan, use the satellite and channel tools on DishTuner satellites and DishTuner channels.

Popular Channel Categories

The DishTuner database focuses on practical receiver data: channel names, frequencies, symbol rates, countries, languages and encryption status. Because category labels are not always available in imported satellite data, use language, country and free-to-air filters to narrow the list to the services most relevant to your setup.

Channel List on Intelsat 35e

The table below shows a representative channel sample for Intelsat 35e. The complete channel lineup may be longer and can change when providers update frequencies or encryption status.

Transponder List of Intelsat 35e

Receiver tuning depends on accurate transponder values. The following sample includes frequencies and symbol rates currently stored for Intelsat 35e. Always rescan from the latest receiver list when services move or providers update multiplexes.

Languages Available on Intelsat 35e

The language data currently associated with Intelsat 35e includes 212. Eng, 2220 Eng, 2320 Eng, 2330 Eng, 2720 Eng, 2520 Eng, 2420 Eng, 2620 Eng, 6178 Eng, 4898 Eng, 4130 Eng, 4386 Eng. Audio language metadata can vary by channel and transponder, especially where a service carries multiple audio tracks.

Main Languages

Main language labels for Intelsat 35e currently include 212. Eng, 2220 Eng, 2320 Eng, 2330 Eng, 2720 Eng, 2520 Eng, 2420 Eng, 2620 Eng, 6178 Eng, 4898 Eng, 4130 Eng, 4386 Eng. If a channel carries several audio tracks, your receiver may show more language options after scanning.

Free-to-Air Channels on Intelsat 35e

DishTuner marks 126 channel-transponder rows for Intelsat 35e as free-to-air or clear where the database provides that status. Free-to-air availability can change, so scan the latest frequencies and verify whether your receiver identifies each service as clear or encrypted.

Encrypted and Paid Channels

The database also contains 67 encrypted channel-transponder rows for Intelsat 35e. Encrypted services usually require a valid subscription, compatible receiver or provider-approved module, depending on the platform.

How to Tune Intelsat 35e

Start by selecting Intelsat 35e in your receiver, then enter one known frequency, polarization and symbol rate from the transponder list. After locking signal, run a blind scan or network scan if your receiver supports it. For dish pointing, DishTuner can help calculate azimuth, elevation and LNB skew for your location using the dish alignment tool.

Why Use DishTuner for Intelsat 35e?

DishTuner keeps satellite, transponder and channel information in one place so you can move from research to setup quickly. You can browse satellites, compare frequencies, check channel countries and use alignment angles before making physical dish adjustments.

Related Satellites

• NSS 9 177.0°W
• Intelsat 18 180.0°E
• Eutelsat 172B 172.0°E
• Horizons 3e 169.0°E
• ChinaSat 3B 167.0°E
• Intelsat 19 166.0°E

Frequently Asked Questions

What is Intelsat 35e used for?

Intelsat 35e is used for satellite TV and radio distribution, data services or regional feeds where the current database lists active channels and transponders.

Which countries are covered by Intelsat 35e?

Country links currently associated with Intelsat 35e include Australia, French Polynesia, New Caledonia, Japan, Mongolia, Philippines, South Korea, Tajikistan, Uzbekistan, United Arab Emirates, France, Russia, but actual reception depends on beam coverage, dish size and local setup.

How can I find channels on Intelsat 35e?

Use the channel list and transponder sample on this page, then scan the latest frequencies on your receiver. DishTuner currently lists 157 unique channels for Intelsat 35e.

Does Intelsat 35e have free-to-air channels?

Some rows for Intelsat 35e are marked as free-to-air or clear in the database. Use the latest transponder values and confirm the result with your own receiver scan.

What information do I need to tune Intelsat 35e?

You need the satellite position, dish pointing angles, frequency, polarization and symbol rate. DishTuner can help with the alignment values and receiver tuning data.

Conclusion

Intelsat 35e at 34.5°W is part of the DishTuner satellite database with useful channel, frequency, coverage and tuning information. Use this page as a starting point, then confirm final reception with the latest scan from your receiver and local dish setup.